Bescon StaTop

Multi-purpose ready-to-use colour surface hardener.

SKU: STA Categories: , ,

Description

Bescon StaTop coloured surface hardener is a multi-purpose ready-to-use topping. It is great for commercial or industrial applications.

StaTop is used to colour and harden the surface of concrete. It can be used with slate impression paving, stencil paving and concrete resurfacing applications.

It is ideal for heavy traffic areas, colouring plain concrete, resurfacing concrete and masonry surfaces. anti-slip finishes, kerbs, garden strips, artificial rocks, rendering and patch up work.

Key Features

  • Colours can be made intense without excessive use of oxide, ensuring consistency of colour.
  • Statop hardens the surface which gives it a hardwearing surface and UV resistant.
  • Statop also reduces the porousness of concrete.
  • Independently tested to exceed Australian standards AS1580.481.1.2 for Adhesion, Colourfast AS2073 for Compressive Strength, and AS1141.42 for Friction Resistance, StaTop gives you guaranteed results.

Please note that some colours are available in powdered release agent, also available in neutral. Liquid Release agent is available in Clear only.

Coverage of 10 to 15 square metres for slate impression paving, and 8 to 10 square metres for concrete resurfacing. Pastel colours may require more StaTop per square metre.

Additional information

Weight 0.0000 kg
Colour

Battleship, Beige, Black, Blue, Bluestone, Brick Red, Charcoal, Dark Brown, Grey, Heritage Green, Limestone, Marigold, Nutmeg, Off White, Olive, Rust, Salmon, Sandstone, Smooth Cream, Tan, Terracotta, Vintage Red

Surface Preparation

Surface preparation is vital to ensure good adhesion. Concrete is to be clean and free from foreign matters.

Remove Grease And Oil Stains: wet area with hot water then apply Bescon Cleanall, scrub with a stiff broom on and around area for a minimum of 5 minutes, keep moist at all times, then rinse off. Repeat if necessary.
Remove Tyre Marks: use Bescon Markzoff as per application guidelines. Walls usually require only a pressure wash.
Remove Surface Matter Build Up: pressure clean at min 2000 psi.
Remove Moss Or Fungus: dilute approx. 10 parts water to 1 part bleach, apply and allow to penetrate for a minimum of 2 hours. Pressure clean at min 2000 psi.
Acid Etch: to remove loose toppings, cement or laitance. Dilute approx. 20 parts water to 1 part hydrochloric acid (depending on porosity). Do NOT allow acid to dry on surface. Pressure clean at minimum 2000 psi.
Cracks Or Depressions: must be repaired, using Bescon Crackfix